1192 views 0 comments

How to Configure a Wi-Fi Device?

by onSeptember 19, 2013
 

In this post we will show the procedure of how to Configure a Wi-Fi Device to make use of together with your laptop or personal computer starts by connecting the WI-FI Router to the same computer that is connected to your modem; It enables automated configuration application to get the knowledge it needs without any intermediary devices along the way.

 Linksys Interface

The Usual Setup Process is given below:

Turn off your WIFI Router.
If you couldn’t find power switch (On/Off or I/O) then Unplug your router device directly from the main power supply.
Power adapter connect in to Power supply.
Now Power LED will blink
Connect an Ethernet cable to the broadband modem.
Restore the power to the modem.
Insert the other finish of the Ethernet cable in to the WAN (wide area network) port on the back panel of the wireless router.
Insert another Ethernet cable between LAN Port one (on the back panel of the wireless router) & any obtainable Ethernet port on the NIC (network interface card) of the laptop computer, which you’re going to make use of to configure the WiFi process.
Shutdown the laptop computer.
Restart the laptop computer connected to the WiFi router.
Let Windows fully load.
Open your Web browser.
In the address bar of the browser, type the URL for the built-in setup screen of the wireless router.
For example, type http://192.168.0.1 for most D-Link routers.
Press the Enter key.
The below table shows a list of the standard addresses for setup screens as well as default usernames & passwords from several major makers.
Router Manufacturer
URL
Default User Name
Default Password
Microsoft
http://192.168.2.1
admin
admin
D-Link
http://192.168.0.1
admin
admin
Linksys
http://192.168.1.1
admin
Admin
3com
http://192.168.1.1
admin
admin
PTCL
http://192.168.1.1
admin
admin
Netgear
http://192.168.0.1
admin
password

Depending on your device maker, you may have to enter a user name such as admin (for administrator), and you may have to enter a password.

linksys01

The opening screen of the setup utility for a Linksys wired router.
Consult the instructions for details. One time you log in, the home screen of the built-in setup method appears.
A typical automated method (wizard) includes the choice to establish a password for control of your router. You ought to do so. This password is to control settings made for the router.
Be the first to comment!
 
Leave a reply »

 

    Leave a Response 

    This site uses Akismet to reduce spam. Learn how your comment data is processed.